Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Neck Shape: Modern "C" Tuner Mounting Config: Dual Guide Pin Fingerboard Material:åÊ Pau Ferro Neck Material: Maple with Walnut Stripe Nut Material: Synthetic Bone Position Inlays: åÊWhite Pearloid Block Neck Finish: åÊSatin Urethane Finish on Back, Gloss Urethane Finish on Front Truss Rod Nut:åÊ 3/16" Hex Adjustment Truss Rod:åÊ Single Action, Head Adjust Fingerboard Radius: åÊ9.5" (241 mm) Scale Length: åÊ25.5" (648 mm) Nut Width:åÊ 1.650" (42 mm) Number of Frets: åÊ22 Fret Size: åÊMedium Jumbo Headstock Thickness: åÊ.
Û (13.71 mm) Neck Thickness: åÊ1st Fret. Û (20.82 mm), 12th Fret. Û (22.09 mm) Peg Hole Diameter: åÊ.IMPORTANT PLEASE READ NOTICE BELOW CAREFULLY: åÊ. All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. ÅÊ All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered.
All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or "blems".
Please contact customer service if you have any questions or concerns about your neck when it arrives. Some neck pocket modification may be required. ÅÊ We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance. This item is in the category "Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Guitar & Bass Parts\Necks". The seller is "sporthitech" and is located in this country: US.
This item can be shipped to United States.